| Esta discussão foi arquivada. Não se pode acrescentar nenhum comentário. | | | olha olha uma brincadeira com o vncserver.
tá bonito, enquanto não haver "lelos" a inventar lá
tenho a conta num p III 450 com 256 MB de ram e um hd de 13 GB .... o mais esquisito é o swap, um de 500MB e outro de 1 GB
vamos lá ver os progs que temos acesso :)
PS: parece que podemos executar mais vncservers pela consola :)
|
| | | | | | Prowd Palm owners check this out... :)
PalmVNC is an implementation of the VNC (Virtual Network Computing)
http://www.icsi.berkeley.edu/~minenko/PalmVNC/
|
| | | | uns erros à mistura, mas tá-se bem
info da dmesg
Linux version 2.2.12 (root@proc4) (gcc version 2.7.2.3) #2 Wed Nov 10 00:15:38 PST 1999
Detected 451028373 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 448.92 BogoMIPS
Memory: 258128k/262144k available (704k kernel code, 416k reserved, 2860k data, 36k init)
CPU: Intel Pentium III (Katmai) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb450
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
keyboard: Too many NACKs -- noisy kbd cable?
keyboard: Too many NACKs -- noisy kbd cable?
hda: QUANTUM FIREBALL CX13.0A, ATA DISK drive
hdc: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALL CX13.0A, 12416MB w/418kB Cache, CHS=1582/255/63, UDMA
hdc: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Partition check:
hda: hda1 hda2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 36k freed
Adding Swap: 522104k swap-space (priority -1)
Adding Swap: 1048568k swap-space (priority -2)
tulip.c:v0.90f 12/17/98 Originally written by becker@cesdis.gsfc.nasa.gov
Driver modified for Linksys LNE100TX Fast Ethernet PCI Adapter on 01/13/99
eth0: PNIC II at 0xe400, 00 a0 cc 37 9b d7, IRQ 10.
eth0: EEPROM default media type 10baseT.
eth1: PNIC II at 0xe800, 00 a0 cc 37 95 69, IRQ 11.
eth1: EEPROM default media type 10baseT.
nfs warning: mount version older than kernel
nsm_mon_unmon: rpc failed, status=-13
lockd: failed to monitor 10.20.10.81
nsm_mon_unmon: rpc failed, status=-13
lockd: failed to monitor 10.20.10.81
nsm_mon_unmon: rpc failed, status=-13
lockd: failed to monitor 10.20.10.81
nsm_mon_unmon: rpc failed, status=-13
lockd: failed to monitor 10.20.10.81
nsm_mon_unmon: rpc failed, status=-13
lockd: failed to monitor 10.20.10.81
nsm_mon_unmon: rpc failed, status=-13
lockd: failed to monitor 10.20.10.81
|
| |
|
